-
No Internet Connection When Firewall Is Turned On
Hi. I have just installed Bit Defender Internet Security 2012. When I turn on the Bit Defender Firewall Module, I lose internet connection and I even lose connectivity to my Local LAN. This is the same problem since 2010. I used Bit Defender Internet Security 2010, 2011 and 2012 but I experienced the same problem. Please…
-
[escalated]paranoid Mode Does Not Automatically Resume After Game Mode Is Disabled
Good day to BitDefender staffs, and thank you for bringing us this fine and dependable security solution. Currently, I have just one small issue regarding Paranoid Mode. As stated in the topic, after using Game Mode (which disables Paranoid Mode) and disable it, instead of enabling itself back, Paranoid Mode remains off…
-
Paranoid Mode Turns Off Automatically
After an upgrade sometimes the Paranoid mode is being turned off automatically, allowing or blocking apps according to its own wit " /> . Irritating, dangerous. Please, please do something !
-
Firewall Is Not Working
Hi I have purchased BD Internet Security 2012 earlier in the week and am having trouble with the firewall not setting up a profile for my internet connection. In terms of modem, I use a Telstra NextG wireless modem (HSDPA). I have attached a couple of shots to show you what I mean with the firewall. The first one shows how…
-
Internet Connection Disabled On Windows Startup
Hello. I'm sorry if this question was asked before and if I'm in a wrong forum to ask it. So far I searched for a solution but found none. The problem is, when my Windows 7 (32 bit) starts up, there's no Internet connection. This started to happen only after I installed BitDefender Internet Security 2012. I had AVG…
-
Adding Ip Ranges To Firewall Adapter
Hi all, So I have a list of China's IP Addresses, and I am trying to add IP ranges to the adapter. I've searched the 2012 forum, and so far the question has been asked twice with no response... What is the correct way to enter a range of IP Addresses to the Adapter Rules in Firewall advanced? Help is much appreciated :-)…
-
Programs Previous Allowed Popping Up Again
Hello, I installed the BitDefender Internet Security 2012 on August 31st, 2011. I am using the Paranoid Mode. I allowed all the programs I needed and everything has been fine until now. Why is it all of sudden asking me to allow some of these same programs all over again. On top of that the other day one of the things I…
-
[resolved]win7 Firewall
I haven't found the answer from the BD2012 documentation-unless I missed it. My question is this: Do I completely disable Windows Firewall or leave it on? Several technicians from my cable company (Charter Services-Missouri, USA) told me that regardless of which security software is installed Windows Firewall must be…
-
[escalated]ip Address Of Router/modem Not Shown Automatically
Sometimes IP address of the Router/Modem is not shown in the Firewall ---> Advanced ---> Adapter Rules ---> Local Area Connection Zone automatically. Also the Trust Level of the Zone is not displayed. Kindly also see the attachment.
-
Web Socket Traffic Gets Blocked
Bitdefender 2012 blocks all Web Socket traffic. Please try the following page in Chrome: http://websocket.org/echo.html (I tried Chrome 14.0.835.202) This is certainly not correct behavior since Web Socket is part of HTML 5 and valid traffic. Using Web Sockets over SSL can mitigate the problem if "Scan SSL" is turned off,…
-
Firewall Slows Tixati
My Tixati torrent client used to give me speeds upto 120 kbps, after I updated from 2010 IS version to 2012 version, it slows the download speeds to max. 80 kbps. Although utorrent gives me me the proper speed. Whats wrong with the firewall? It also cannot remember rules properly and asks often what to allow.
-
How To Add Ip Range In Adapter Rules?
I have been trying a lot but I can't add an IP Range in the Adapter Rules in the Advanced Tab for Firewall Settings. Does anyone know how to add an IP Range?
-
Adapter Rules
To Add a Zone in Adapter Rules of the Firewall, I should input the IP address of the computer or an IP address range. So my question: How should I write an IP address range ? x.x.x.x - y.y.y.y ? Thanks for any hint, Regards Macario
-
Firewall Asks Often Same Question
Hello, In previous version, we had a checkbox to retain our choice when a software wanted to connect to Internet and the pop-up bitdefender firewall appears to ask to do. When we checked "retain" and disabled, bitdefender didn't ask again at every run of this software, only when the version of the executable changed. In…
-
Squeezebox Duet Blocked
Hi all, I have a Squeezebox Duet (Controller and Receiver) Squeezeserver is runnining on my PC, however I need to disable the BD 2012 firewall to allow any of it to work. I have done a fresh install of the SB software and factory reset the hardware. Everything works fine if the FW is turned off. Any ideas? Thanks Alan
-
Bdis 2011 And 2012 Cause Disconnections In League Of Legends
Both BDIS 2011 and BDIS 2012 cause frequent disconnections in League of Legends game giving error "Disconnected from pvp.net" which makes the game unplayable. All programs permissions are properly set and server IP is white-listed. Uninstalling BD products completely resolves the problem. It happens under Windows 7 x64.…
-
Hackshield Games Crash With Bitdefender 2012
I know this topic has already been issued on yet no measurements has been taken. Since I began using BitDefender 2012 (which was about 2 weeks ago), none of the games which uses Hackshield (an anti-hacking program) are able to run. It will load for a little and then show up with an error saying that an error has occured,…
-
"port Scan Detected" Pops Up Every 10 Minutes
I get the following alert extremely frequently everyday: "A port scan agaisnt your computer was detected and blocked." It seems that my laptop (which is in my home network in windows 7 64bit) port scans my desktop (the PC on which the issue is present, which also runs the same OS) all the time. I'm also getting it from an…
-
Can't Change A Aplication Rule Seted By Mistake!
Ok I was with the firewall on paranoic and I accidently seted a program on block & I cheked the remember box. Know evrey time I start that program appears on denny in firewall even if I manualy change it on allow? How can I fix this?
-
Your Computer Appears To Be Correctly Configured...
Just upgraded to 2012, from 2010/2011 BDIS. I receive the following error message: "Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding" I have narrowed it down to the BD Firewall. I have troubleshooted everything else...router, network connection, flushed DNS, reset…
-
Disable Firewall (no Vga, Remote Desktop)
Hi, I'm install BitDefender on a device that doesn't have a VGA card connected to its motherboard. I was using Microsoft Remote Desktop Connection to install it. Now, I'm unable to connect to it. Apparently, BitDefender is blocking the port, which I believe is kind of stupid since I was using it while installing the…
-
Is It Okay To Allow Inbound Connections For Browsers?
I am using Bitdefender Internet Security 2012. In application rules for firefox, IE incoming traffic is allowed by default. The firewall has general settings to block incoming ICMP. Do I need to block incoming connections for browsers? I have attached screenshot of firewall settings for firefox.
-
Ids
Why was removed from the virus proactive IDS module, and why is not available for the advanced mode of AVC, in the version of BDIS is a paranoid mode.
-
Internet Connection Sharing Disabled Automatically
Hello I installed "Bitdefender Total Security 2012" .But i have a problem When my windows started, the "Internet Connection Sharing" in firewall setting set off automatically and i cannot connect to internet and any website, and i must open bitdefender and the firewall setting and set it on when my windows started…
-
Very Slow To Load A Web Page!
When Bitdefender Internet Security 2012 (x64) updated to ver 15.0.27.338, and now updated to ver 15.0.31.1282, Surfing the internet is very very hard. Some website is load normal (ex: mp3.zing.vn), most website need to reload a few to load it (Ex: google.com.vn,youtube.com) and some website is not load (Ex:…
-
Clean Usb Hdd Blocked By Bd As Intrusion Detected
I have a buffalo MiniStation™ Stealth USB 3.0 - HD-PCTU3. When I plugged in this HDD, Bit defender prompted that 'Intrusion Detection has detected and blocked a potentially malicious application'. (I have the IDS option turned on.) I turned off the IDS option and scanned the external drive. Nothing, it's clean. I even…
-
Stop Port Scan Popups But Continue To Stop Port Scans
The port scan pop up is annoying. Have tried to disable. Not working. Please help. Windows 7 64Bit SP1 Total Security 2012 No Other Security Fresh Install Intel Core i5 760 16 GB Ram
-
Chrome Problem
Hi Another problem I encountered with the chrome browser is that it requires me to constantly add itself to the firewall application rules. And periodically its getting removed and chrome gets blocked from the internet. Operating system : Windows 7 (64-bit) BD Version : BD Total Security 2012 Chrome version : 14.0.835.186
-
Bitdefender 2012 Slowdown Internet Connection
Hi there, i feel that BitDefender 2012 users have same problem like mine. When i browsing internet either using Internet Explorer (IE8 & IE9) and also Mozilla Firefox (Build 6.0.2), it's feel so slow when loading a web page and some time it's feels years to the web browser show the page even using search engine like Google…
-
Windows Live Mail Needs Firewall Turned Off?
Hi, I installed 2012 Total Security. Now Windows Live Client does not work unless I turn off the firewall? I cannot configure firewall as well. I have allowed these EXE's: wlmail.exe wlcomm.exe Yet Mail does not work. Please help. Sunil Gupta