-
Bf3 Ping Wont Show On Battlelog Or In Game Please Read!
Well randomly i pulled up chrome to play bf3 and pings dont show i disabled windows fire wall still didnt work but it worked before with firewall on and i also tried it in firefox really appreciate some help:) Thanks
-
Firewall Question
Hi , i set up the Firewall like the Recomend Settings , but now my IP change all the days ( I have dynamic IP ) . I am From Argentina , but before i do that changes ( stealth mode : off and Generic Adapter : YES ) my IP dont change never . Is this a problem of this Firewall changes that my IP changes every day ? Thanks
-
Firewall Striping Low Level Packet Info - Breaking Programs
Since the weekend I've had troubles with all the computers in the office not being able to send information using http://www.medical-objects.com.au/. It's used to securely send medical info back and forth to the doctors. I got their (NO) techs to work on the problem and they finally came up with the culprit as Bitdefender.…
-
Action Center Alert: No Firewall, No Antivirus!
Hi, couple of times now I get this message from action center that my antivirus, firewall and anti spam are off but when I check my BD I can't see anything wrong.I just restart my computer and after that all is OK.Today even after restart message stayed and had to disconnect and restart again and then message was gone! So,…
-
Connection Reset By Peer On Network Drive
Hello, Since moving to BitDefender Internet Security 2013 I have one problem concering access to a network drive. This is only affecting the Windows 7 PC's on my home network (XP seems ok). I have a Western Digital ByBookWorld Edition II network drive connected to my router, and after around 10 minutes (not constant) of…
-
Ids Alerts & Autopilot?
I'm trialing Total Security 2013, and I have a question. If I turn the "Intrusion Detection System" in the Firewall settings on, and set it to "Normal," what impact if any will this have on running in AutoPilot mode? Will I still get an occasional IDS alert, even on AP? If not, then how will the IDS alerts be handled?
-
Remote Access Question
Hi , i have a PC connected with a modem ethernet and the BitDefender Total Security 2013 . Always internet connected automatically through the network called " Network 2" , but a few days when i start the PC , a new network was detected called " Network 3" after i made a changes of the firewall , and now always connect to…
-
Possible Unwanted Wi-fi Connection
Since I'm using wi-fi I've got "monitor wi-fi connections" switched on in Bitdefender Internet Security 2013. Looking at the firewall events the WAN IP address of my router appears every 20 minutes (plus a few seconds) the whole time my laptop is connected to the internet. There's another IP address though that appears at…
-
Has My Firewall Been Remotely Disabled?
I just checked the network activity log in Bitdefender Internet Security 2013 and near the bottom it says "[bDFW] [DEVIO] Firewall disabled". The next entries in the log are almost a week later, but during that 6 day gap I was using my laptop and BD certainly never reported the firewall being off. When I used to use BD…
-
Blocked Application Was Allowed Access
Hi. Vista Ultimate and BD Total Security 2013. The firewall is set to paranoid. This morning I received two popups asking if I wanted to allow or deny firewall access to 2 processes. I chose to deny both requests (see attachment "capture 02"), however when I investigated the 2 new alerts in the BD "Events" area of the…
-
Firewall Preventing Windows Updates
Hi all I have downloaded the trial version of BitDefender Total Protection 2013. Ive heard lots of good things about it. My problem is that since I have installed it, Windows updates do not work. Any ideas?
-
Firewall Causing Lag Spikes
Hi, I have been using the same firewall settings for a number of months now and for whatever reason they are starting to cause lag spikes again. I use to have it on home/office but then lag spikes occurred, i made a post about and Cristian, i think their name is, said to use on trusted, i turned stealth on and to have…
-
Potentially Malicious App Blocked
Hi. Vista Ultimate and BD Total Security 2013. I noticed a notification that the firewall has blocked a potentially malicious application. I had a look at the BD Firewall IDS tab (see attached screen shot) but couldn't see any info about what was blocked. Is there any way to identify what the firewall blocked? Regards...
-
Need Help Using Xampp
So I've had Bitdefender Total Security 2013 for a while. I need to figure out how to use XAMPP and run my local web server while using the Antivirus. It technically works. But when I do SQL queries it's extremely slow. I've done a bit of research and a bunch of posts points to a firewall and open the ports, etc. So my…
-
Call For Help With My Dialup Connection
I'm on a dialup connection, 21.1 kbits average. OS. BD 2013 total security. Win7 64 I went through my application rules in BD newtrk settings and 'denied' or 'removed' (if i could not deny) network access to all programs (visible in the interface) except my browser. I use NetworX shareware to monitor my internet…
-
Opening Port On Firewall, Not For Specific Program
I use BD 2013 and found this thread: http://forum.bitdefender.com/lofiversion/i...php/t41978.html "I have installed Internet Security 2013 on a PC that I use to host a personal website but with Firewall turned on access to the website is blocked. What are the right Firewall settings to allow http services (port 80) from…
-
Bitdefender 2013 Causes Sonos Problems
With my SONOS music player system, I have noticed that the GUI in Windows 7 keeps resetting while I am trying to use it. When I turn off the firewall for BitDefender 2013, the problem goes away so BD is definitely not allowing something to occur with it's ports. I cannot for the life of me to figure out how to allow…
-
Cant Scroll All The Firewall Application Rules
As the title says, I can't scroll down all the Application Rules under the Firewall Settings. The last rules doesn't show. I know there is no scroll bar and all you can do is use the mouse wheel to scroll but even so, It doesnt go all the way down. Is this a known issue? I'm running Total Security 2013 on Win 8 64bit
-
Firewall Adding Rules On Paranoid Mode
1)I notice lately the firewall is adding few rules by itself even thought i have manage adapter's on Public network, stealth on and generic off... I want to be asked for every application and this was not happening some months ago. 2) what is actually "generic" in your pdf manua says: "If the IP address of a network…
-
Block Internet Access
Hello! I have the full Bitnet Internet Security 2013 product. Is there a way to instantly (or quickly) stop all incoming/outgoing web traffic in Bitnet without unplugging devices? Thanks in advance! - George
-
Firewall Off, Bd Obtrusive
Bitdefender won't allow me to play the PC game Hawken. I have tried completely turning off the firewall and AV and it's still a no go. Running Bitdefender Internet Security 2013 and Windows 8. Have made all of the suggested changes that are pinned on the Firewall forums, added an exclusion for the program and as I…
-
Paranoid Mode Goes Off
hello there, i'm using my bd ts 2013 firewall with paranoid mode one, kinda "paranoid" indeed, but i like to keep in control with what wants to go online. once in a few pc restarts (haven't found a pattern) i see that the the paranoid option is showed "off", although i wasn't the one turning it off. using win 8 64x. is it…
-
Manage Adapters> Network Types Problem
A month ago i had to switch my network type in manage adapters to public from home/office because it was adding some rules i dint want and asking for few others. So i want to ask a lot of things about network types and privacy and yes i already read the user manual: Note: I am a security freak so i have paranoid option on,…
-
Bitdefender Block Vmware Bridged Network
Hi, I'm using Bitdefender Total Security 2013 and VMware Workstation 9 on Windows 7 64bit . i have virtual machines need for internet access and network (Bridged Mode) but i'm unable to do it with the bitdefender firewall ON Only work with Firewall OFF . Please help me to fix the problem Best Regards Catiaso
-
How To Enter Ip Address Range
How does one enter an IP address range for firewall rules? I tried the forms x.x.x.x-y and x.x.x.x:y and others. Some formats return an error and some appear to be accepted, but when looking at the rule the range is not shown in any rule. Only individual IP address rules show up. Thanks,
-
Total Security 2013 - Rdp
Having a heard time creating a rule to allow RDP which I assume is port 3389 Any easy walk-through please
-
Server Not Found
keep getting server not found message tried to configure firefox but still getting it. any advice?
-
Fire Wall Problems
Christian, in your article "How To Create A Zone In Bitdefender Firewall" you advise on the settings for the network type. However I can't change any of the values. For the Stealth mode, I can see the options are Remote/On/Off yet the setting remains fixed at Remote whatever I select. I'm running Windows 8/64 and trying to…
-
Http/1.1 403 Blocked By Bitdefender
Hi, I have written an application that needs to update itself by downloading files (including libraries and executables) from the internet. My application has been working fine using both FTP and HTTP, but since this morning I keep on getting the exception "HTTP/1.1 403 Blocked by Bitdefender". I added an application rule…
-
"age Of Wushu" Game / Firewall Or Exeptions Problem
wushu forum thread Just installed the game and having problems with BD. most of the times the problems with free mmorpg games with their anticheat ( gameguard etc.) . i tried ewerything cant fixit myself . please help i upload BitdefenderSupportTool report