Bjarne

Hello Please check this screenshot and make the following settings on your router: http://screenshots.portforward.com/Dlink/D...ll_Settings.htm Thank you. I'm so sorry, but i do not agree that i have to tamper with the firewall setting in the router, the problem is with BD2012 and runing inside the network. Then it most…

Hi Not sure how to disable the firewall in router, try looking in manuel, seems there no check call disable firewall

I first tried without /24 Here is print from 2 PC, there have the same issu. the 3 PC where i uninstalled BD2012, i can provide info aswell if needed. I Trust as soon as you see this info. that you remove it............................. PC 1: Microsoft Windows [version 6.1.7601] Copyright © 2009 Microsoft Corporation. Alle…

Just as a extra infomation the scanner have worked the hole time regarding setting change. Try set firewall off and reboot, but that didn't helped. My 2nd. PC just uninstalled BD2012 and the printer is working fine on the 2nd PC. so i'm possitive that it have something to do with BD2012, i just don't know what.

I'm sad to say it didn't work. all have setup as message back. just saying "Printing" and more dosn't happing. Coming back to the point that it did worked before i installed BD2012 internet sequ... paid version

Ok how now set it like this. Se picture but still no print. 52 is DIR-635 199 is Canon MP495

Welcome back Bjarne Yes, in Adapter rules. You should see all the network resources listed there and you can select them from the list. Thank you. Don't get it. Have added, all zones 1 to 32 and printer still don't work. have added a picture. Have only Wireless Network Connection in Networks. and only used zones for the…

Hi and welcome to our forums. Make those setting in the firewall and ad zones form the printer and for the router. For the router please use IP ranges like: 10.10.0.1/24 (example) Thank you. Just to be 100% sure In Firewall/Advanced/Adapter rules put in IP 10.0.0.199/24 and 10.0.0.52/24 and if't not 24 as Zone is there a…

Found this on the forum, but this didn't help me. - open Bitdefender, go to Firewall panel and make sure it is turned on - click on "Network details" and locate the adapter. It is either Local Area Connection if the device is connected by cable or Wireless Area connection if it is a wireless device - for this particular…