Bd Rescue Cd Can Not Find A File System To Scan

Is your display device connected via DVI cable?

no I have an amd card with vga 15 pin standard as main monitor and Hdmi to my tv(I have tried to unplug no different).

thanks for quik response.

can I set the screen res using TAB at menu screen to trick it? what code should VGA + be?

thanks topper.

On 2nd system change the display resolution and then check.

And on first system, are you using RAID configuration? Verify this from Disk Management.

1. my system is using a single hdd :sys res 100mb: healthy sys c : and partitioned d:logical(sata 0) dvd sata 1

2. as for the video issue I have just got back from removing a virus on another machine using an nvidea gt 430 with the same set up i.e standard vga 1280 X 1024 and I removed hdmi lead . this again said the res was too low so using TAB at menu I set the VGA to j this worked and successfully removed a Trojan but it was fiddly to tell the menu to fix: as the button was below the screen at the bottom.

this person is now using bitdefeder 2013 trial.

I shall try changing the res on the graphics card and re boot again.

back soon thnx again.

back to my machine @1280x1024 bit defender hangs at spaceship screen.

reset res 1280 X 960 :same

use tab set vga=j reports NO LIVE FILE SYSTEM to scan

I don`t understand I works fine on my girlfriend machine @1024X768.

I think that the file system error should resolved firstly with my machine.

anymore ideas ?.

just to let you Know my machine can boot from cd and identify my Hdd with other online scanners and software tools like spinrite etc.????? baffled.

My system:

m/board gigabyte Ga-a55m-ds2

amd a4-3400 :socket FM1 Llano

8gig RAM

Graphics AMD radeon HD7700 1024 mbytes vga + HDMi(unplugged)

HDD western digital 500gb 2 partions c: and d: on sata 0

Dvd w/r sata1

Windows disk mngr indicates all clean and healthy sys reserved + primary and logical

I have also tried the earlier version of bitdefender recue cd same results NO FILE SYSTEM TO SCAN (verbose mode only)menu option 1 just hangs.

Please help i`ve been bigging this product up and now I canot fix my own pc.

Best regards TOPPER.

for anyone else out there to set vga res PRESS TAB at start menu and edit VGA = G(1026x768

just ran avg cd rescue no problem exept foun 3 Trojans probeblly false possitives as they were in bitdefender folders

running bitdefender BETA at present anyone any idias as to WHY BD rescue cannot see my HDD

TOPPER

Hi

Spinrite is a very powerful tool, why are you using this?

Also read this post

http://forum.bitdefender.com/index.php?showtopic=16592

I use spinrite when I have suspect Physicaly Damaged HDD`s just repaired a laptop with it:Thats besides the point why can`t your cd scanner find my drive and how can I manualy mount it if your software wont load?

its been a long time since I used UNIX/Linux I shall investigate the above post and see how I get on.

thnx again. topper.

the post no good I tried mounting manualy using those examples in verbose mode no good at all

keeps returning no live file system.

anyway my machine is clean I HOPE disappointed that no one at this site Knows the answer and I can`t use the rescue cd on my machine for some unkown reason to me and bitdefender.!!!!!!!!

using a usb cd rescue it displayed the usual desktop but only the usb stick is mounted going into terminal using "sudo" commands it still was unable to find my HDD it just scans the usb.

AM I JUST WASTING MY TIME I would like to know?

please get back to me with some usefull information or will stick with other scanners which are more user friendly.

as I have said it works on all my costomers machines 32 /64bit sata ide laptop etc and the screen res problem What is the problem.

confused TOPPER.

Is your display device connected via DVI cable?

as I have said NO its connected using a standard 15 pin Vga lead my graphics card has an additional HDMI o/p which I diconect when running the bd scanner.

THE disply resoloution is not the only problem in verbose mode it cannot find a LIVE file system, This is also the case when I try to run the scanner from a usb stick this displays the deskop but does not find my HDD.

the Hdd was setup by windows 7 so should be correct,as I have said the other scanners(competion) work fine and also use Ubunto/Linux

as for the graphics issue I have tried using the onboard vga @1280x1024 still hangs at spaceship logo.

Please someone get back to me I don`t believe I am the only person out there who has thease problems.

best regards topper.

can ANYONE OUT THERE AT BITDEFENDER GIVE ME AN ANSWER I think I`ve given as much info as I can. HELP PLEASE!!!