Bitdefender 2010 And Shared Internet Connection Pb

Hello RV2U,

We recommend you to try the next troubleshooting steps :

-> Open BitDefender, click on the Settings button, select the Expert Mode then click on Ok. Click on Firewall, temporarily uncheck "Firewall is enabled" and now please test in order to see if the connectivity issue reoccurs.

-> If it doesn't reoccur please re-enable the Firewall, then select the Network tab in the upper menu and click on the current "Network Type", pull down the drop-down menu and select "Trusted Local", Stealth to "No" and Generic to "Yes". In the Zones area please click on the "+" sign and add the IP address of the local device that you are trying to connect to;

-> If the connection is unsuccessful please go to the Status tab, click on the "Advanced Settings" button and check the option called "Enable Internet Connection Sharing" . Now please uncheck "Block Port scan" as well and click OK. Test in order to see if the connectivity issue is still present.

If these steps don't manage to resolve the issue please reply to our email with a complete set of reports generated by the tools available in this article and also a full description of the procedure that you are using in order to connect to that network resource:

http://kb.bitdefender.com/KB389

Also, please include the files called "profiles.xml" and "rules.xml" located in :C:\Program Files\BitDefender\BitDefender 2009\Firewall and "firewall.txt" located in C:\Program Files\Common Files\BitDefender\BitDefender Firewall .

Thank you .

Hi, some more findings. On 2 of the pc’s I upgraded to BD TS 2010 i got the Windows update XML Core Services 4.0 SP2 ‘download loop’. The ‘cure’ which was no solution: rename (system32)msxml4.dll to .NOT, download from Microsoft the manual patch and install (choose remove). Install a second time and then install.

Back to topic. Did what Alex advised. Shared Internet worked fine when the firewall was disabled (on the main pc). I do have an old fashioned cabled homenetwork with 2 network cards inside the main pc (1 to the cablecompany and 1 to my homenetwork pc’s). I choose Trusted Local and Stealth to None, generic to yes for the homenetwork nic. I did allow the IP’s of the clientpc’s in the zone area (DHCP on). After enabling the firewall still no shared internet. Funny that shared internet works fine for a few minutes after switching shared internet connection from off to on.

For now I disabled the BD firewall permanently and use the Windows firewall instead.

What is killing the shared internet connection?

Regards, TM

I invest my time in this software because it proved to be the best quality for a good price.

Okay, I will send you the files.

Installed BD TS 2010 today on my 3th pc (a brandnew Netbook). Found out that during installation msxml4.dll v4.20.8970.0 (XP) got replaced by msxml4.dll v 4.20 9818.0 which triggers windows automatic update to start downloading a 'new' MS XML Core Services 4.0 service pack 2.0 and entering a downloadloop. This happened now after 3 installations on 3 different pc's. So it's no coincedense anymore.

Installation on the 3 days old netbook suffered a crash during the update proces. Rebooting (after sending a mail about the error) did the trick. And on top of that my 2nd pc spontaneously started (re)configuring BD TS 2010 (on the screen: Windows is configuring BDTS 2010) Click yes to restart Windows now). Spooky.

Keep on wondering about the world and software in specifc.

TM

Okay that's fine. Found out that when i deleted the msxml4.dll en the 4r.dll because Windows update kept on nagging about an necessary (safety) update in order to run windows update one more time (and it keeps on making system recovery backups) Bitdefender always comes up with the configuration wizard even if BD is already configured, registered and activated.

So still in the blind how to troubleshoot the msxml 4 core sp2 update problem.

Regards,

TM