Bitdefender firewall no longer works and it keeps turning off after the latest update

Hello,

Hello,

The fix has just been sent out. You may need to restart your device first, then try a right-click system tray icon update, and it should show the update happening incrementally, i.e. 32% 45% 78% etc, until it updates. A restart is not required.

As of 27.08 I still have this issue, even if I turn Windows firewall off I can't turn BD firewall on.

I did reinstall and now it's working fine.

Hello @michaelstop,

Check if these articles help:

Regards,

Alex

Hello @Zap and thanks for joining us here.

First, may I ask what Bitdefender version you got there? As the UI looks a bit outdated from what we have right now. This is how the Protection menu looks like on my PC:

I would recommend to re-install the latest Bitdefender version available. As for the firewall issue you are experiencing, do you have any other security solutions installed on the device? If yes, these should be removed and following a Windows restart, you can try again to activate Bitdefender Firewall.

If this is not the case, follow the guidelines from this Microsoft article, then restart the computer and try again to activate Bitdefender Firewall:

It concerns the Windows Firewall, but the fix also applies for Bitdefender Firewall.

In the event the above instructions don't make a difference and the firewall is still disabled, try the following:

1. Go to Start -> in the Search bar type regedit and hit the Enter key.

2. In the Registry Editor window browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip

3. Click on Tcpip then look in the right side and search for the Start key. Double click on it and change the Value data to 0.

4. Restart Windows and try again to activate the Firewall.

If this doesn't work, update the network adapter driver. You can install it from the manufacturer's official website or update it from Device Manager: go to Start > in the Search bar type Device Manager and hit Enter > wait for the list to be populated then expand the Newtork adapters entry > right-click on each entry and select Update Driver Software > choose Search automatically for updated driver software. Once the process completes, reboot the computer. Reinstall Bitdefender from Control Panel.

Last but not least, if the firewall still can't be fixed, kindly get in touch with the Bitdefender Support teams for further assistance. You can contact them using the link below:

https://www.bitdefender.com/consumer/support/help/

Scroll down to state your contact reason, then choose from the available contact channels, chat, phone and email/ticket. Chat would be the fastest way to reach them.

Let us know what worked for you. I hope the information is helpful.

Regards,

Alex

Hi @Zap,

I understand. That's a bit unusual..

Anyway, first you will have to remove the current version completely and the best way to do this is to use the dedicated uninstall tool available at the link below:

Use the unistall tool for Total Security. This way, you will make sure all traces of Bitdefender are removed from the device before proceeding with the fresh installation. Then make sure to remove the respective device from Central as well, so that it doesn't occupy a slot. Go to https://central.bitdefender.com/ and sign in using your account credentials. Then follow the steps from this article:

Afterwards, you can re-install the latest Bitdefender version directly from Central.

Go to to My Devices -> Install Bitdefender products on your device -> Add device.

This could also fix your firewall issue, but I cannot guarantee it. You will only know after installing the latest version and in the event the issue persists, you can resort to the instructions I have provided earlier.

Let me know how it goes.

Regards,

Alex

Ok then something is not right there.. Head to the link below to get in touch with the Support teams in this case:

https://www.bitdefender.com/consumer/support/help/

Scroll down to state your contact reason, then choose from the available contact channels, chat, phone and email/ticket. Chat would be the fastest way to reach them.

I'm sorry I couldn't help more..

Hello @entrealist,

Follow the guideline from this Microsoft article, then restart the computer and try again to activate Bitdefender Firewall:

https://support.microsoft.com/en-us/mats/windows_firewall_diagnostic

It regards Windows Firewall but the fix also work for Bitdefender Firewall.

If this doesn't help, try the following:

1. Go to Start -> in the Search bar type regedit and hit the Enter key.
2. In the Registry Editor window browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip
3. Click on Tcpip then look in the right side and search for the Start key. Double click on it and change the Value data to 0.
4. Restart Windows and try again to activate the Firewall.

Another possible solution to consider if the above instructions don't fix the issue is to update the network adapter driver.

You can install it from the manufacturer's official website or update it from Device Manager:

Go to Start -> in the Search bar type Device Manager and hit Enter -> wait for the list to be populated then expand the Newtork adapters entry -> right-click on each entry and select Update Driver Software.

Choose Search automatically for updated driver software. Once the process completes reboot the computer.

Reinstall Bitdefender from Control Panel.

If the issue still persists, then I think it's a task for the Support engineers, because more information might be required from the affected machine in order to troubleshoot this behavior. Head to the link below to get in touch with them and explain the issue along with the steps taken so far:

https://www.bitdefender.com/consumer/support/help/

Scroll down to state your contact reason, then choose from the available contact channels, chat, phone and email/ticket. Chat would be the fastest way to reach them.

Let us know what works for you and what was the root cause.

I hope the information is helpful.

Regards,

Alex