Kindly be advised we cannot cancel subscriptions or issue refunds on the forum.
You may cancel your Bitdefender subscription from Bitdefender Central or by contacting Customer Support at: https://www.bitdefender.com/consumer/support/help/

Thank you for your understanding.

The current Bitdefender version, build number link.

Options
1234568»

Comments

  • Ryuuta87
    Options

    Hi all,

    I also got the latest build 27.0.30.135 for Internet Security.

    I didn't notice anything different after update, so I assume the cryptomining protection module that mentioned by @gur_helios is reserved for Total Security or higher tier subscription.

    No system restart was requested for me during the update, but I restarted my computer anyway.

    Regards

  • Ryuuta87
    Options

    Hi @Alexandru_BD

    Thank you for your explanation, it is very clear now 🙂

    Regards

  • SeriousHoax
    Options

    Technically isn't it available in other Bitdefender editions also? I thought this is something Bitdefender was detecting anyway through signatures + behavior blocker.

  • Flexx
    Flexx DEFENDER OF THE YEAR 2023 / DEFENDER OF THE MONTH ✭✭✭✭✭ mod
    Options

    Exactly my point. Bitdefender already detects crypto mining software via signature-based detection and advanced threat detection. What does introducing this feature bring that is new?

    @camarie can you provide us with insight here?

    Regards

    Life happens, Coffee helps!

    Show your Attitude, when you reach that Altitude!

    Bitdefender Ultimate Security Plus (user)

  • camarie
    camarie Principal Software Developer BD Staff
    Options

    I know about the feature release, but not the details.

  • Flexx
    Flexx DEFENDER OF THE YEAR 2023 / DEFENDER OF THE MONTH ✭✭✭✭✭ mod
    Options

    If possible, you can get some information on this.

    Also, @Alexandru_BD if you can also help in getting an update on the same.

    Regards

    Life happens, Coffee helps!

    Show your Attitude, when you reach that Altitude!

    Bitdefender Ultimate Security Plus (user)

  • gur_helios
    gur_helios ✭✭✭
    edited February 21
    Options

    Hi folks

    My experience with the latest build 27.0.30.136 of Bitdefender is that the autoscan settings are reset to the following values every time. See screenshot below.


    However, the settings should remain with the previously selected changes after restarting the system as can be seen below.

    The same error already occurred in the previous version.

    Regards

  • Alexandru_BD
    Options

    Hello @gur_helios,

    I've seen another report for this in the discussion below:

    @camarie do you know if this is a known issue by now and can we do some tests? 😅

    I've forwarded this to the Support teams as well.

    Thanks!

    Premium Security & Bitdefender Endpoint Security Tools user

  • camarie
    camarie Principal Software Developer BD Staff
    Options

    I am not aware of such an issue. Support/QA should verify the issue and come back if they confirm the issue (or not).

  • Alexandru_BD
    Options

    Update: an investigation has been opened by the developers following your reports.

    Thank you for bringing this to our attention @gur_helios 👍️

    Premium Security & Bitdefender Endpoint Security Tools user

  • TaxiMagicien42
    TaxiMagicien42 Defender of the month ✭✭✭✭
    Options

    Good morning,

    As for me yesterday, I received version 27.030.136 of Bitdefender. 

    The configuration of the protection against crypto mining was done automatically.

    For now, I have not reported any problems with this latest version of Bitdefender.

    Regards.

    TaxiMagicien42

    WIndows 11 Home 23H2

    AMD Ryzen 5 5600X 6-Core Processor 3.70 GHz

    Bitdefender Premium Security Plus

  • gur_helios
    gur_helios ✭✭✭
    edited February 22
    Options

    Hi,

    I'm pretty sure your autoscan settings are set back to the default values if you make a reboot. Did you try that out?

    https://community.bitdefender.com/en/discussion/comment/335055/#Comment_335055

    Regards

  • TaxiMagicien42
    TaxiMagicien42 Defender of the month ✭✭✭✭
    Options

    Hello,

    Allow me to intervene simply to point out that a few days after receiving version 27.0.30.136 I noticed two malfunctions that I exposed on the French forum. 

    I contacted bitdefender support by email this morning and attached a Windows Support Tool log.

    Regards

    TaxiMagicien42

    WIndows 11 Home 23H2

    AMD Ryzen 5 5600X 6-Core Processor 3.70 GHz

    Bitdefender Premium Security Plus

  • gur_helios
    gur_helios ✭✭✭
    edited March 5
    Options

    Hi friends

    I just got build 27.0.30.140 which fixes the "Autoscan" issue at boot up. A device restart was not necessary to take the changes in effect.

    Regards

  • TaxiMagicien42
    TaxiMagicien42 Defender of the month ✭✭✭✭
    Options

    Hello @gur_helios

    Thank you for that information.

    I will check to see if I have received the latest version. 

    Regards.

    TaxiMagicien42

    WIndows 11 Home 23H2

    AMD Ryzen 5 5600X 6-Core Processor 3.70 GHz

    Bitdefender Premium Security Plus

  • TaxiMagicien42
    TaxiMagicien42 Defender of the month ✭✭✭✭
    Options

    @gur_helios,

    I just checked (manual update) and I still have version 27.0.30.136. 

    No doubt that this latest version is deployed voluntarily in a progressive way.

    I am glad that your problem has been solved with this latest version.

    Regards.

    TaxiMagicien42

    WIndows 11 Home 23H2

    AMD Ryzen 5 5600X 6-Core Processor 3.70 GHz

    Bitdefender Premium Security Plus

  • Flexx
    Flexx DEFENDER OF THE YEAR 2023 / DEFENDER OF THE MONTH ✭✭✭✭✭ mod
    Options

    It seems like it's an F1 race, where the winner consistently reaches the finish line first by receiving the Bitdefender product upgrade. After a thorough study and analysis of the statistics, it has been concluded that the Bitdefender product upgrade of the year 2023 goes to our very own "eagle eye" @Gjoksi

    Congrats @Gjoksi 😎

    @Alexandru_BD & @Mike_BD will be so proud of you.

    Regards

    Life happens, Coffee helps!

    Show your Attitude, when you reach that Altitude!

    Bitdefender Ultimate Security Plus (user)

  • Alexandru_BD
    Options

    😂😂😂

    @Flexx no, he doesn't get the updates that fast anymore, since he reinstalled the product some time ago, he's on a different rollout batch. I remember he was not happy about this, but I couldn't do anything about it, sadly... 😅😁


    Premium Security & Bitdefender Endpoint Security Tools user

  • Flexx
    Flexx DEFENDER OF THE YEAR 2023 / DEFENDER OF THE MONTH ✭✭✭✭✭ mod
    Options

    The award is for Year 2023, and from what I see in the post, he is the clear-cut winner, lol. @Gjoksi, it seems @Alexandru_BD is not happy with your achievement. Are you thinking of the green color, lol? 😂

    Regards

    Life happens, Coffee helps!

    Show your Attitude, when you reach that Altitude!

    Bitdefender Ultimate Security Plus (user)

  • Alexandru_BD
    Options

    😂😂

    Premium Security & Bitdefender Endpoint Security Tools user

  • Gjoksi
    Gjoksi DEFENDER OF THE YEAR 2022 / DEFENDER OF THE MONTH ✭✭✭✭✭
    Options

    Hello.

    I just got the latest build:

    NOTE: A device restart was NOT required for the changes to take effect.

    Regards.

  • gur_helios
    gur_helios ✭✭✭
    edited April 18
    Options

    Same here 😁

    In the release notes, build 27.0.35.146 is still mentioned, but the update came with build 27.0.35.147. 😊

    @Gjoksi

    I just see that the my scan engine is a little bit newer than yours. Engine version 7.96555 to 7.96553. Initiate an update again and check the scan engine version afterwards.

    Regards, Uwe

    Addendum:

    Just got an other update for Bitdefender and I recognize that the version of the scan engine has climbed to build 7.96556. I didn't know by now that after each malware definition update the version of the scan engine encreases. Never realized that before.

  • gur_helios
    gur_helios ✭✭✭
    edited May 29
    Options

    Hi friends

    I got build 27.0.38.163 two hours ago. A device restart was not necessary to take the changes in effect, but it took a while until the update was installed. Thus, be patient and don't stop the update process until it runs completely through.

    Regards, Uwe

  • Scott
    Scott Defender of the month mod
    Options
  • Nunzio77
    Nunzio77 Defender of the month mod
    Options

    It's just a shame that during the update the Windows notification appears warning you that the device is not safe, when in reality this is not the case because the basic security components of Bitedefender remain active during the update.
    This Windows notification sends users into "panic", especially the less experienced ones.
    You should make sure that this Windows notification when updating Bitdefender does not appear in my opinion.
    I know I've asked this other times, but in my opinion it's important that this implementation is done.

    Nunzio ·

    Bitdefender Plus, Windows 10 Pro-32 Bit, CPU Intel Core2 Duo T7500, RAM 4 Gb - Bitdefender Mobile Security

  • RedsFan
    RedsFan ✭✭✭
    Options

    Annd if there is a new update why is it not available for download in BD central ?? its always previous version . . .

  • Alexandru_BD
    Options

    Hi @RedsFan,

    Can you elaborate on you previous comment? Are you referring to the 'update' command in Central?

    Premium Security & Bitdefender Endpoint Security Tools user

  • Scott
    Scott Defender of the month mod
    Options

    I think he's talking about the version/build that gets downloaded from Central when we do a install, or reinstall, that it's never the current version, but the previous one. So then it has to catch up to the newest build a day or two later, including what could be the long install pause at 84%. But, I could be absolutely wrong and have just said a lot for nothing 😅

    All Bitdefender Home Product User Guides: https://www.bitdefender.com/consumer/support/user-guides/

  • Alexandru_BD
    Options

    Okay.. 😃

    Premium Security & Bitdefender Endpoint Security Tools user

  • RedsFan
    RedsFan ✭✭✭
    Options

    Hi,

    Yes its like scott say, when download the new installer it installs always the previous build.

  • camarie
    camarie Principal Software Developer BD Staff
    edited June 3
    Options

    That depends if there are kits published or not. These are not build (officially) for every update, at least not immediately. It's similar with Windows Update (or any other update) - one can get multiple update items, but there is no Windows version for each and every one of them.

  • Scott
    Scott Defender of the month mod
    edited June 27
    Options

    A new build update rolled out today. It hasn't hit me yet, so I'm not sure if it will require a restart.

    https://www.bitdefender.com/consumer/support/answer/32196/#:~:text=Bitdefender's%20most%20recent%20version%20number,causing%20OneClick%20Optimizer%20to%20hang.

    Bitdefender’s most recent version number is 27.0.40.169 and was released on June 27, 2024.

    Product Update Changelog:

    – Fixed an issue causing a Bitdefender process to hang.
    – Fixed an issue where Battery Profile would not start.
    – Improved Anti-Tracker functionality.

    All Bitdefender Home Product User Guides: https://www.bitdefender.com/consumer/support/user-guides/

  • gur_helios
    gur_helios ✭✭✭
    Options

    Just got the new build. A restart was not necessary.

  • TaxiMagicien42
    TaxiMagicien42 Defender of the month ✭✭✭✭
    Options

    Good morning,

    I received this morning the latest version of Bitdefender (27.0.40.169).
    I confirm that I did not need to restart my pc.
    Moreover, for the moment, I have not noticed any problem following this update.

    Regards,

    TaxiMagicien42

    WIndows 11 Home 23H2

    AMD Ryzen 5 5600X 6-Core Processor 3.70 GHz

    Bitdefender Premium Security Plus

  • gur_helios
    gur_helios ✭✭✭
    edited July 9
    Options

    Hi everyone

    I just got the new build 27.0.40.173. A restart of the system was not required. There is no changelog available yet at the time of writing this post.

  • Scott
    Scott Defender of the month mod
    edited July 9
    Options

    Thank you for keeping us updated with your posts, @gur_helios as I use it to keep another forum updated as well :)

    All Bitdefender Home Product User Guides: https://www.bitdefender.com/consumer/support/user-guides/

  • Gjoksi
    Gjoksi DEFENDER OF THE YEAR 2022 / DEFENDER OF THE MONTH ✭✭✭✭✭
    Options

    @Scott

    as I use it to keep another forum updated as well :)

    And which forum would it be? Kaspersky?

    😂😁🤣

  • Alexandru_BD
    Options

    He's on Malwaretips, I think. 😃👍️

    I'm gonna update the changelog as soon as I have it, at first glance this looks like a major release.

    Premium Security & Bitdefender Endpoint Security Tools user

  • Gjoksi
    Gjoksi DEFENDER OF THE YEAR 2022 / DEFENDER OF THE MONTH ✭✭✭✭✭
    Options

    @Alexandru_BD I know that, buddy, but i was just trying to tease him @Scott. 😁

  • TaxiMagicien42
    TaxiMagicien42 Defender of the month ✭✭✭✭
    Options

    Hello everyone,

    I will have to wait quietly (I am not in a hurry) because this new version, does not seem to be available yet for French users.

    Regards,

    TaxiMagicien42

    WIndows 11 Home 23H2

    AMD Ryzen 5 5600X 6-Core Processor 3.70 GHz

    Bitdefender Premium Security Plus

  • Alexandru_BD
    Options

    Premium Security & Bitdefender Endpoint Security Tools user

  • SeriousHoax
    SeriousHoax ✭✭✭
    Options

    Thanks for providing the changelog 😊 A big update indeed.

    Hi @camarie! You said one of your previous comment that your team is working on some optimization of the product. Are these new drivers related to that? Can you provide any insight regarding these new drivers?

    And @Alexandru_BD, do you know when this new version will be available via the BD installer? As you know when you download the installer, it often downloads an older version of BD and then updates to the new build when you check for updates after installation.

  • camarie
    camarie Principal Software Developer BD Staff
    Options

    I don't know about the drivers, sorry. We started something regarding the consumer product itself (not the various components it integrares, although I will try to measure that as well).

  • Alexandru_BD
    Options

    Cheers @SeriousHoax,

    I don't have the timeline I'm afraid, but it should be available soon. 🙂

    Premium Security & Bitdefender Endpoint Security Tools user

  • DarekWa
    Options

    I am not sure if after this last update 27.0.40.173 Find mine device on Win11 23H2 requests are not blocked :/ Can you investigate other users?

  • Alexandru_BD
    Options

    Hi,

    To which requests you are referring to?

    Thanks

    Premium Security & Bitdefender Endpoint Security Tools user

  • arun7129
    Options

    The latest major build 27.0.40.173 update was released on 09.07.2024, but I am still on build 27.0.40.169. I tried to update manually, but the build version is not updating to the latest build version. I also uninstalled and reinstalled the application, but I still do not have the latest build. Can anyone please help me install the latest build?