-
rescue CD bug report (and idea for a fix) for PXE/network boot and no DNS name resolution
This is a bug report for the rescue CD. I use a custom PXE setup to netboot the live CD. DNS name resolution does not work and I believe I know why. cat /proc/cmdline BOOT_IMAGE=bitdefender/kernel.i386-pc root=/dev/nfs real_root=/dev/nfs nfsroot=192.168.1.1:/srv/nfs/bitdefender/ ip=dhcp loop=/rescue/livecd.squashfs…
-
Rescue Cd Mode Without Internet
Hi, Is it possible to make a rescue usb drive with the update pre-installed for those that can't connect via Ethernet cable to do the update after entering rescue mode? Thanks Michael
-
Welcome To Grub!
I have used Stickifier as indicated here http://www.bitdefender.co.uk/support/how-to-create-a-bitdefender-rescue-cd-627.html to create a USB rescue drive but when it loads, is just stuck at Welcome to GRUB! with the cursor blinking. I have also tried using Rufus to create the USB bootable drive, with the same result. Any…
-
Rescue Cd 2Nd Boot Fail
Hi, I've successfully created a BitDefender Rescue USB, booted the system with it, scanned the drives, but when using the USB again on that system and on others it doesn't load the BitDefender software anymore. The Linux OS on the drive starts just fine, just not the Virus/repair scanner. Any ideas how to fix? Thanks, Klaas
-
Rescue Cd Zeroed Out Files And Almost Filled Disk
I ran the rescue cd and after six hours stopped it. There were some issues, some of which I had fixed. I asked it to delete several infections, all of which were old and minor. I couldn't exit the cd so I ejected it. During the reboot Windows 10 stated that it was repairing my drive. Those files and many many others that…
-
Problem Initializing Gui With Bitdefender Live Rescuecd (Invalid Loop Location: /rescue/livecd.squas
Hi, I am facing a peculiar problem and require help. I was trying to initiate the live RescueCD via a flash drive in my laptop. The problem is, things went fine with the initialisation and then suddenly I would get a prompt of "Ignoring BGRT ..... Invalid loop location: /rescue/livecd.squashfs". The rescueCD is am using is…
-
[Sent To Devel] Rescue Cd Upgrade And Wifi Support
Hello! First; I'm sorry for my poor English (I'm from Italy) Second: sorry for posting a question here, but I couldn't fine Rescue CD in the support section options. Ok, go on! I'm a fan of Bitdefender rescue CD: it helped me to restore customers PCs several times. It's very effective, so it's always my first choice if I…
-
Bitdefender Rescue Cd - Weird Error Message
Dear Bitdefender, I recently downloaded your latest Rescue CD ISO from your website and used it on a friends ASUS computer and it worked just fine after I figured out to type livecd and startx to get it going. Once I did that it worked great. Then I came home and tried to scan my own system and it gave me the following…
-
Rescue Cd Not Working
I see two different ISO files and have tried them both and cannot close the deal on getting them to scan my HD. Both versions burned to CD and successfully get them to provide the opening graphic at boot but after selecting it to scan the HD I get a quick blast of text about 15 lines long and the machine hangs and hangs,…
-
Bitdefender Rescue Disk-username And Password
Hi, I have already seen a topic asking for the password for Bitdefender rescue disk. I am also surprised that till now nobody answered this query. The default username is "bitdefender" but the password is not the same. Somebody from the Bitdefender team should answer this question. Regards, yvkiran
-
Rescue Cd Shuts Down Scan Without Fixing Anything.
Sorry if this is covered elsewhere, but the search function did not like my search terms, which I used as the topic for this post. Apparently, it doesn't like the word CD, because it is less than 3 letters.(SMH) Made a rescue CD, works GREAT on my desktop, except for stupidly blanking the screen and not giving you an…
-
Bitdefender Rescue Cd On Usb !
Hi a lote of pepole ask me : can we use BD Rescue CD of usb ????? answer yes download Bitdefender Rescue ISO image from here Download this tool Browse to find ISO image (you downloaded from Bitdefender Server) NOTE : BE SURE USB HAS BEEN FORMATED IN FAT 32 now click create and waite about 3 minutes now make change to your…
-
System Always boot_s In Rescue Mode
I Installed Bitdefender Total Security 2014 with 90 days license, it worked fine but i tried rescue mode scanning and after scanning i shut down. From that time when I turn on PC the system is always booting in the rescue mode, Windows(8.1) is not at all opening. I can open windows only using the ASSIST button in Sony…
-
Any Trick To Enabling Wifi ?
The network icon in the lower right of the screen, doesn't really respond. When you right click you can see "enable network" or "enable wifi", but selecting them with the mouse doesn't do anything. I did get a list of wifi networks to come (not sure how, I can't repeat it) when I connected to my access point, it refused…
-
Updating The Rescue Cd
Hi all, I love the BDRCD as it has helped me out in the past, but is there a way I can add some updated drivers? I use an older 2010 version of the disc because the efi that is built in since then doesn't work with multiboot, and I would guess this would apply to newer discs as well. I use PowerISO and am familiar enough…
-
Bitdefender Rescue Cd - Different Versions
Please explain the differences of the BitDefender Rescue CD versions. Some of the file sizes shown are currently: Version 2 Folder: 514 MB Version 3 Folder: 629 MB Root Folder: 656 MB Are there advantages of one version over the other? Why is the one in the Root Folder larger than the other two? What is the version of the…
-
Usb Rescue Disk Fails To Boot, "no Such File Or Directory" Error
I created a Rescue Boot USB today, but the USB will not get past the screen shown below. I am trying to run this on a Windows 8 HP Pavilion g7 laptop. I enabled Legacy boot options, prioritized the USB to boot first, disabled Secure Boot, and just about everything else that I could think of to get this to boot. Also, I…
-
Ipxe Network Boot Of Rescue Cd
I would appreciate anyone sharing their menu configuration who has had success in using iPxe to http boot (perhaps sanboot?) the newer Rescue CD iso image since it is in isohybrid format. I've spent a few days trying both pxelinux & iPxe and haven't managed a successful result. Many thanks, Mark
-
Where Are Updates For The Bootable Scanner Cd?
After downloading the ISO image for the Bitdefender On-Demand Antivirus Scanner, I created a CD and attempted to run it on my laptop. As soon as it booted and was initialized I received an Update Error: the server address is not correct. The server address that was preset was…
-
Moved: Bitdefender Mobil
This discussion has been moved.
-
Error With Rescue Cd From Usb
its giving me an error about bitdefender rescue cd hwd.bin does not exist after choosing to start in english and boot from the usb specificaly the error starts with: hwd.bin does not exist please run udevadm hwdb --update then it just sits there and does nothing
-
Problem - Need Help
Hello: I have a problem. I have an older Celery laptop running WinXP Home. Because its been acting odd lately, and none of the anti-malware software I'm currently using was detecting any problems, I download and burned the Rescue CD. It booted fine, seemed to run fine, and when done reported that there were 3 issues - but…
-
Bootable Cd Scanning Bases And Tyoes Of Threats,
Hellow, I have an question for you. I shall need to scan my flash drive with data for different threats by your bootable cd because no operating systems will be accessable. That is why I ask you to write me if the boot cd uses the same bases and their sources of updates as your windows software. What types of threats can…
-
Bitdefender Antivirus Scanner Shows Unknown Key
I have downloaded the latest .iso of the Rescue Disc, burned the CD, booted it in, overcome the username request with "livecd", entered the startx command and now have a desktop. The update wizard failed (code 7) even though it is online to the Internet. The wizard window now shows under Registration Information Key…
-
I Need Help To Boot This New Version With Grub4dos
Hi. Last time, about 6 month ago, I asked help to boot Bitdefender Rescue CD from its iso file with Gru4dos. I was quickly guided by the highly efficient Bitdefender tech support team. Thank you, guys. Now I wanted to try the new version, and I found that it's different. Now it uses Grub2 EFI for the boot menu. After a…
-
Rescue Cd Readonly And I Can't Boot Into Window8 Because Anti Theft Function With Freezing Keyboard
my laptop is LENOVO Idea z580 window8 with UEFI fist problem is i can't type anything when i start a labtop and anti thift password is appear i try to use usb keyboard but not work i load rescuecd but when i boot from it i can't delete anything in c drive because about fastboot anybody please help me to find solution
-
Worm + Found With Emergency Disk
(I posted this in the anti-virus free edition section and was directed here.) I ran the emergency disk and it found a worm and another item (can't remember). I looked for the results in the (free edition) logs but it wasn't listed. I was wondering where to find the logs? Also, although I was able to disinfect the worm, and…
-
Rescue Cd
Is there a link somewhere for a current .ISO file for a 2014 New Bitdefender rescue cd? I did find one but it dates back to the end of November. Thanks.
-
Confused About Rescue Cd Logs
Hi everyone , i need some insight on some logs that the rescue disk showed , i have no idea what these are . Scans with multiple on demand scanners have come up empty including Mbam, Emsisoft , Eset, SAS, Rogue Killer , Kaspersky etc... List of objects to be scanned: - /run/media/livecd/System Reserved -…
-
Freeware Bitdefender Rescue Cd Needs License Key
I use a downloaded freeware bitdefender rescue cd with a multiboot usb stick. It boot_s in UEFI PC and starts a GRUB2 menu. Bitdefender boot_s and halts with the message: Update error: The update tool has quit unexpectetly (return code 12). In the next step the message: "Your current license key is not valid" is displayed.…