-
Rescue Cd
I am trying to make a resuce CD. I downloaded bitdefender-rescue-cd.iso and burned it to a CD using "InfraRecorder" and WriteImage as instructed on the BitDefender site. However, I get an error message when trying to boot - ISOlinux:Disk error 32, AX=42F6, drive 9F boot failed. Any help would be appreciated.
-
Rescue Mode - Rescue Cd Alternative
Starting with Bitdefender 2012, we provide customers a new way to scan the PC from outside the operating system. Rescue Mode is an advanced alternative to the classic Rescue CD. [How to install Bitdefender 2012] http://forum.bitdefender.com/index.php?act...f=226&id=42 [How to use Rescue Mode]
-
Bitdefender Cd & Pxe
I am trying to get the BitDefender CD to run via PXE on my network. I've successfully gotten it to boot and get a network connection, but the system is not performing DNS resolution. When I boot the CD up normally (via the drive, not PXE), DNS resolution works without a hitch. This is the entry I have in my PXELINUX boot…
-
Monitor / Computer Won't Wake Up?
Using the latest rescue cd to clean up WindowsXP The machine booted on the cd fine, the scanner started automatically although it hadn't listed anything as scanned yet. I walked away for about an hour assuming it would take several to do its work. When I came back the display is asleep. Seems like the computer is as well.…
-
"update Error The Server Address Is Not Correct"; Setup Log Only - No Removal?
After booting a notebook with the rescue CD a popup appears: "Update error The server address is not correct" afterwards it seems to me that the scanning starts automatically WITHOUT updating the virus signatures. Why? How can I force the RescueCD to update? The notebook is connected to a router via WLAN/Wifi. It works…
-
Failed To Scan: Error Code C000001d
i have been trying for about a day now to resolve an issue that i have - virus or malware or whatever kind of infection. I have used a number of products available, (kaspersky, avira, acronis, and bitdefender) with the same results: the scans always end prematurely. Kaspersky is the only one so far that has at least given…
-
How To Edit Startup Settings...
Hi, I have the BitDefender Rescue software on USB, works great!.. however is it possible to edit a config file or somehow save the application configuration permanently to make the "Enter archive files" option under the settings menu "on" by default each time the system is rebooted?
-
Does This Boot Cd Detect Tdl-4 "bootkit"?
This sets up a new botnet - the rootkit installs itself in the MBR. Please give an authoritative answer.
-
Help With Rescue Disk Scanner
I've used the 2009 version of the bitdefender disk with much success. However, in attempting to use the 2010 version since the previous version expired, The scanner does not load the antivirus engines, and the scanner crashes without an error message or any error code. What can i do to fix this problem? I'm also not able…
-
Definitive Answer Re: Username & Password?
I have been very pleased with having the ability to scan an infected/unbootable computer using the BitDefender Rescue CD until this latest version. Now, apparently, I am required to enter a password in order to use the Rescue CD??? I have downloaded the latest version available (Jan. 31, 2011) as an ISO, burned the ISO to…
-
Not Scanning After Update
Using the Rescue CD on a computer that I had recently found quite a few virus/ trojans on. (Just to be sure the machine is now totally clean) When machine is connected to the internet it updates definitions etc, the "loading antivirus engine" message appears, then nothing. When I unplug from the network and do not allow an…
-
Update Error: Mismatch Between Version.dat And Versions.sig
hello, i just download a Bitdefender rescue cd and burn it... i can boot the live cd without any problem. but i cannot update it, it give me a message: Update error: there is mismatch between the 'versions.dat' and 'versions.sig' files. how to solved this issue?
-
Image.dd How Do I Read This File?
Topic title says it all! Thanks for your products and thanks for any advice.
-
Cant Download The Rescue Cd
http://download.bitdefender.com/rescue_cd/...r-rescue-cd.iso Forbidden You don't have permission to access /rescue_cd/bitdefender-rescue-cd.iso on this server. I cant download the cd. Above is all I get when I click on the iso link. Any ideas?
-
Need Key For Rescue Cd?
I downloaded and successfully burned the rescue CD ISO. When it boot_s it says the key is expired and I need to get a new key? Is this correct behavior? Thanks, Mike
-
Help !
when starting Bitdefender Rescue CD , it requires user and password, does anyone knows what it is ?? tks in advance
-
No Network Device
Just got the BitDefender-Rescue-CD DEC2010 verion, it boot but will not perform update as there is no network device being detected. This happens on a DELL VOSTRO 230 computer with AMI BIOS and Broadcom 57xx NIC. Try the same CD on two old models; DELL Optiplex310 and Dimension 3100, both works fine, being able to detect…
-
Rescue Cd Boot Loop
I am trying to make a rescue CD for a friends computer. I downloaded the 2010 ISO file and burned it to CD with ImgBurn. To test the CD I put it in the CD drive and booted my computer I get the first screen and pick the default (English). Get the next screen for the license agreement. At this point no mater what I do my…
-
Bitdefender Won´t Even Start
Hi guys, I´m trying to use Rescue Disk but it won´t even start. I tryed to update my windows to see if i´d get the operation system to iniciate. When windows started in a few seconds many process (a lot of virus, i think) began to run and the pc was killed. I boot Windows Pro SP3 to update, but in the middle of the…
-
Rescue Cd Loaded In Dos, But Froze While Scanning The Computer
TO make a long story short, I was using my computer normally tonight and all of a sudden it froze (wasn't doing anything crazy, just checking Facebook). So I rebooted the computer and found out my monitor did not have any signals going in. After a few attempts of moving the cables around, I finally got the monitor to…
-
Mounting Cdrom Failed
Hi, I am trying to use BitDefender Rescue disk to get rid of a virus on my PC. When booting with the rescue disk in verbose mode, everything seem to work fine until it try to mount the cdrom. I get the following errors: Mounting /dev/sr0 on /cdrom failed: invalid argument Unable to find a medium containing a live file…
-
[question] Bitdefender Rescue Disk - How To Boot It From Usb (linux/windows)
Could someone tell me how can I prepare usb stick and how must i copy the Rescue Disk iso image into thumbdrive, under Linux or Windows? I've tried: * under Windows: robocopy with "/mir" option under Windows 7, UNetBootin, * under Linux: dd if= of= command, UNetBootin; and still your rescue disk won't boot. It can't even…
-
Thank You - And No Net!
Hi there (sorry, my englich is "school englich" First of all: I just want too thank you very very very much! The recue CD form bitdefender worked under 3 hours! Kaspersky, AVG, F Secure and lot off words from different "longhair´d " forums (A danisch term)didn´t help at all! Kaspersy took over 13 hours!!! Im not a rokie,…
-
What Is The Midas_2010 Iso?
I am getting a bit confused regarding the different versions on the Bitdefender rescue CD. In this topic http://forum.bitdefender.com/index.php?showtopic=20720 it says that both bitdefender-rescue-cd.iso 06-Aug-2010 19:02 319M rescue_new.iso 06-Aug-2010 20:02 319M are the same Iso. But what about the folder with the…
-
Remove Low Resolution Warning When Bdgui Is Run
Hi I have remastered the liveCD (bitdefender-rescue-cd.iso 06-Aug-2010) to include the ability to email the results of the scan back to me I would also like to be able to remove the low resolution warning when bdgui is ran for the first time. Is this possible? When I remastered the liveCD I changed…
-
Cannot Find Hard Drive Partition On Rescue Cd Desktop
I am trying to get rid of a virus and was recommended to use the rescue CD and delete some files from the hard drive that way. I can load up the rescue CD without any issue, however, there are no icons for the hard drive on the desktop as it appears in some of the screen shots. I've tried going through the file folders and…
-
Change Resolution To 1024x768?
Hello Using the default settings, the Rescue Disk starts in 800x600 and complains that the resolution is too low to run the app in graphic mode. FYI, this servers + monitor run Windows just fine in 1024x768 @ 75Hz, and even higher. I tried adding "screen=1024x768" to the command-line, to no avail. FWIW, the default…
-
Rescue_cd Vs. Rescue_new?
Hello I noticed that there are two files available for download, with the same size but within one hour of each other: bitdefender-rescue-cd.iso 06-Aug-2010 19:02 319M rescue_new.iso 06-Aug-2010 20:02 319M Does someone know the difference? Thank you.
-
[terminal] Changing Keyboard Layout?
Hello I can successfully boot up BitDefender in French on a laptop from a USB key, but when I launch Terminal, the layout is for the US keyboard, and "loadkeys fr" just outputs an error (""Unknown keysim 'trademark'"). Does someone know how to change the keyboard layout in the command-line? Thank you.
-
Rescue Cd Failure
When I boot from 2009 rescue CD, it fails after searching slow USB devices, stating "Can't find KNOPPIX filesystem, sorry. Dropping you to a very limited shell. Press reset button to quit." I created the CD with Nero 9, including verification & finalization of written data. I don't know what to do with…