-
Bitdefender Blocking Sql 2012
Good day Bitdefender support I having a bad day, my SQL 2012 was working good after the update I did about 3 months back, but I reinstalled my pc and everything and updated every thing, but now my SQL 2012 does not want to connect anymore but if I uninstall Bitdefender 2013, SQL works again. I did everything from updating…
-
Unable To Download From Many Sites
Hello, I am using BTS 2013. The problem is that I am not able to download from many sites e.g. filehippo, softpedia,cnet etc. Even I am not able to download any executable files from adobe... flash player offline setup,Folder lock from their home page,auslogic products,and many others.Also not able to download from most of…
-
Pinned Firewall Recommended Settings Still Relevant?
Read your Pinned Firewall Recommended Settings post as seen below: We recommend you to make sure the Firewall settings are allowing the PC communication with the internet as follows: - open Bitdefender, go to Firewall panel and make sure it is turned on - click on "Network details" and locate the adapter. It is either…
-
Recommended Response To Port Scans?
I have BIS 2013 on my PC, to protect my ADSL2+ connection, and I seem to be getting frequent port scans. At least, I'm getting frequent reports from BD that a port scan has been detected and blocked. Am I adequately protected, or is there something more I need to do? I understand I can create a rule denying the IP address…
-
Network Adapter Resets To Public
hi, Im having an issue were the network adapter resets to public. Not sure why. If the network is on anything but trusted then i get lag spikes every couple minutes. Get them when watching streams, playing online games or downloading. The streams will freeze then resume and i will have missed a small part, downloads go…
-
Constant Portscans Block Event
I want to know if i shoudl be worried that im receiveing a lot of portscan blocked event coming from the same ip´s daily these are the ip´s: 156.154.70.22 and 8.26.56.26 im receiving constant portscans from those ip addresses. is this normal? should i contact someone? thanks in advance.
-
Windows 8
the firewall section of TS 13 is not recognizing network adapters in windows 8.
-
Pinned Firewall Recommended Settings Still Relevant?
This was also originally mistakenly posted in the BD 2012 Products>Firewall forum. Read your Pinned Firewall Recommended Settings post as seen below: We recommend you to make sure the Firewall settings are allowing the PC communication with the internet as follows: - open Bitdefender, go to Firewall panel and make sure it…
-
Backdoore In My System..?
I HAVE NEWLY INSTALL BITDEFFENDER TOTAL SECURITY 2013 YESTERDAY AND I SAW IN FIREWALL EVENT LOG "THE APPLICATION SYSTEM IS ATTEMPTED TO CONNECT TO THE INTERNET USING 41 PROTOCOL ON PORT 0. BITDEFFENDER FIREWALL HAS GRANTED ACCESS FOR THIS APPLICATION" AND ALSO THERE IS OUTDOING CONNECTION BY "EXPLORER.EXE" PROCESS.. IS…
-
[fad] Detected Same Wi-fi Connection Many Times But Without Pop-up
Bitdefender is detecting Wi-Fi connections many times but there is no pop-ups for that. Kindly see the attachment. Settings: User Mode and Paranoid Mode are enabled.
-
Windows 8 - Firewall Vs Bitdefender Conetention
I have had all sorts of strife with Windows 8, windows defender and bitdefender, resulting in several re-installs and eventually a return to w7 . I did not realise the product I have does not have a firewall, and in W8 it doesn't recognize bitdefender correctly, the actions centre continues to report no protection and…
-
Strange Behavior Of Bitdefender Firewall !
After watching the video online, my Firewall remains active even in the case of a complete shutdown the browser. Screenshot #1 explains the behavior of the Firewall after turning off the video and browser (still working). Screenshot #2 explains calming down the situation when I set Network type to "Untrasted." Screenshot#3…
-
Bitdefender Don't Detect/prompt Network Type
Whenever a new Network connection (Wireless or LAN) becomes enable, Bitdefender don't prompt for Network Type regardless of the Type set in the Windows Firewall.
-
Bitdefender Don't Detect/prompt Network Type
Whenever a new Network connection (Wireless or LAN) becomes enable, Bitdefender don't prompt for Network Type regardless of the Type set in the Windows Firewall.
-
Bd Doesn't Remember Advanced Fw Settings
Hello, On "Firewall settings/Advanced", BD doesn't remember anything (except IDS) after restart. The only way for users to change settings is to modify "C:\Program Files\Bitdefender\Bitdefender 2013\settings\firewall\settings.xml" Regards!
-
For Christian - Serious Firewall Problem
@ Christian Having a serious problem with the IS2013 Firewall, and tried to send the message below THREE times as a PM, but apparently something is wrong with the PM system, because I hit send, yet there is no "Sent Messages" in my forum control panel. I have run the Support Tool, and have it uploaded, but removed the link…
-
I Want To Be Paranoid!
I really don't understand why paranoid settings are forgotten (even in new build). Some examples: - I set FW like this: Now, If I unplug my PC and go on Laptop Mode, this is what I get: This happens on my 3 PC (W7, 32 and 64 bits), so it seems to be a general behaviour, but the user guide just states: "When Bitdefender…
-
Forgetting Settings On Reboot
Samsung 7 W7 64 bits I start with these settings: At reboot this is what I get: " /> I think this is a bug!
-
How To Setup Firewall To Allow User Control?
Bitdefender Total Security 2013 auto allows a programs access and makes a rule auto in the firewall. I remember using Bitdefender Internet Security 2009, on the default settings, every program that i just download and install it ask what options i want to do either allow access or block. On the main page it displays the…
-
Ids Detecting Legitimate Applications And Processes
Kindly see the attachments that IDS is detecting Windows legitimate processes as malicious due to which the desktop icons are not loading properly during booting. IDS settings: Normal.
-
Stealth Mode
Is stealth mode working for anyone?My settings are Public/stealth mode on/generic yes and i fail both shields up & PC Flank stealth test.Shields up shows only three ports stealthed
-
Laptop Mode
When BD goes in laptop mode, my FW settings (paranoid and advanced) are changed. Is it correct?
-
Bd-is2013: Firewall Setting For "deny All"
Hello bitdefender-support, Hello community, in BD2011IS and before it was possible to set the firewall-setting to "Deny all trafic". All requests was blocked without message or other user-interaction, when no entry was founded in application-filter-rules. I want to allow only certain applications access to certain…
-
Advanced Settings
I have set up all FW advanced settings to ON, so I am in user mode. Now, I just tried for testing to turn Game Mode ON (well, actually I don't play games), then OFF, and what I then discovered opening Control Panel is that my FW settings were reset as shown. It seems that also in this case FW settings (or User Mode…
-
Very Specific Firewall Rule Question
I want an application to allow all incoming traffic and deny all outgoing traffic except outbound connections to Port 4070. I failed creating this firewall setting using the Bitdefender Firewall. Is there any way to do this?
-
Forgetting Settings
I installed BD on my new Samsung laptop (W7 32 bits) and this is what I find: - I make the following settings - I reboot (no other changes) and this is what I get Of course I'd like that my User Mode settings should be preserved! Where is the problem? Thanks!
-
Bitdefender 2013 Blocking Access To Directadmin Control Panel On Port 2222
Hello everyone, Since upgrading to Bitdefender Internet Security 2013, I am not able to connect and login to several DirectAdmin Control Panels on port 2222. It does not matter if I use the IP address or the domain address. I am using Windows 7 (fully updated), Firefox 15.0 (beta), Firefox (14.01) and Internet Explorer 9.…
-
Canon Mp620 Printer Just Stopped Working
HAVE BDEF 2012 IS AND WIRELESS PRINTER WAS WORKING FINE BUT NOW JUST QUIT AS "PRINTER NOT RESPONDING". SAW IN OTHER POSTS YOU HAD A FIX FOR 2013. DO YOU HAVE ONE FOR BDEF 2012? CANON SAYS EVERYTHING IS FINE ON THE PRINTER AND I CN PRINT FOM MY LAPTOP. JUST THE DESKTOP GIVING ME PROBLEMS. ADVISE. THANKS.
-
Bitdefender And Bandwidth
I installed Bitdefender IS 2013 and it has the same problem that happened to me earlier, the band width is at maximum without me downloading anything. Anyway, this happened after I updated Internet download manager to the latest build. Before everything was fine. I hope this help fix the problem that is still from the 2010…
-
Lost Network Computers
Since moving to Bitdefender my spare computer and the dlink plug internet connectors no longer connect to the internet anyway of checking why