-
We Have To Add Application Rules When Auto Pilot Is On?
Every time a run an application which require connect into internet (with auto pilot on). Bitdefender's firewall does not ask me whether i allow or deny it. i have to manually add it in the firewall setting. Is it a bug? since i didn't see the firewall add any application into application rules list.
-
Set Network Type To Trusted
Hi all, Is it safe to set network type to TUSTED instead of HOME/OFFICE? Whats the difference between these two? Will bitdefender firewall still going to protect me if I do so? BTW, im using internet security 2012 Thnx
-
Application Rules
BDIS 2011/2010 had a feature in its firewall in Application Rules: "Remember Action" and with it ticked whenever I clicked "allow" or "Block" it remembered my settings and did not ask again. In BDIS 2012 how do I do this?! I have Paranoid Mode 'on', autopilot 'off' (as I want to train my firewall), but it seems that the…
-
Advanced Firewall Config Issue
Hey guys, Ok... here I am - new PC - New fresh build of Windows7x64 - new fresh install of BDTS (updating from 2011 to 2012). I need to isolate and allow a "packet" being blocked by the firewall. Can't locate an "Expert View" option - so I say to myself - Hmmmmwtf? Sooo, I navigate to - "Home - Firewall - Advanced -…
-
[escalated]Speedcheck
Hallo,some internet sites will not so fast open.I`ve checked the ping from this test,(http://www.speedtest.net/).With Bitdefender total security on, (Google chrome),ping =708 ms.With IEand Mozilla=210 ms.Without BD,about 39 ms. My system :Windows 7/64,Browsers:Google Chrome vers.14.0.814.0,IE10,Mozilla 5.01
-
Port Scan Detected - Not Solved
Im still getting this message from bitdefender: "PORT SCAN DETECTED" every three or four minutes. I checked the IP address that is involving this and its always the same and never change and its my IP. Technical support was very smart, told me to block that IP address thru Adapter rules in firewall setting (Sure will cause…
-
Chrome Problem
Hi Another problem I encountered with the chrome browser is that it requires me to constantly add itself to the firewall application rules. And periodically its getting removed and chrome gets blocked from the internet. Operating system : Windows 7 (64-bit) BD Version : BD Total Security 2012 Chrome version : 14.0.835.186
-
Wireless Printing
BD 2010 was due ot expire tomorrow and so renewed this morning to Bitdefender Total Security 2012. Now cannot print to wi-fi printer. Not too technical so having difficulty working out what the problem is and taken me 2 hours to work out it might have something to do with Firewall. However the suggestions above refer to BD…
-
Firewall Lacking Reporting Of Applications Trying To Access The Internet
I installed BitDefender 2012 for the first time today, and I have to say it's the most disappointing version of BitDefender I've ever seen. Gone are the days when I could control my firewall within BitDefender. Instead of prompting whether or not applications should be allowed to access the internet, BitDefender 2012 does…
-
Squeezebox Duet Blocked
Hi all, I have a Squeezebox Duet (Controller and Receiver) Squeezeserver is runnining on my PC, however I need to disable the BD 2012 firewall to allow any of it to work. I have done a fresh install of the SB software and factory reset the hardware. Everything works fine if the FW is turned off. Any ideas? Thanks Alan
-
How To Add Ip Range In Adapter Rules?
I have been trying a lot but I can't add an IP Range in the Adapter Rules in the Advanced Tab for Firewall Settings. Does anyone know how to add an IP Range?
-
Adapter Rules
To Add a Zone in Adapter Rules of the Firewall, I should input the IP address of the computer or an IP address range. So my question: How should I write an IP address range ? x.x.x.x - y.y.y.y ? Thanks for any hint, Regards Macario
-
Firewall Slows Tixati
My Tixati torrent client used to give me speeds upto 120 kbps, after I updated from 2010 IS version to 2012 version, it slows the download speeds to max. 80 kbps. Although utorrent gives me me the proper speed. Whats wrong with the firewall? It also cannot remember rules properly and asks often what to allow.
-
[resolved]win7 Firewall
I haven't found the answer from the BD2012 documentation-unless I missed it. My question is this: Do I completely disable Windows Firewall or leave it on? Several technicians from my cable company (Charter Services-Missouri, USA) told me that regardless of which security software is installed Windows Firewall must be…
-
Bdis 2011 And 2012 Cause Disconnections In League Of Legends
Both BDIS 2011 and BDIS 2012 cause frequent disconnections in League of Legends game giving error "Disconnected from pvp.net" which makes the game unplayable. All programs permissions are properly set and server IP is white-listed. Uninstalling BD products completely resolves the problem. It happens under Windows 7 x64.…
-
Clean Usb Hdd Blocked By Bd As Intrusion Detected
I have a buffalo MiniStation™ Stealth USB 3.0 - HD-PCTU3. When I plugged in this HDD, Bit defender prompted that 'Intrusion Detection has detected and blocked a potentially malicious application'. (I have the IDS option turned on.) I turned off the IDS option and scanned the external drive. Nothing, it's clean. I even…
-
Hackshield Games Crash With Bitdefender 2012
I know this topic has already been issued on yet no measurements has been taken. Since I began using BitDefender 2012 (which was about 2 weeks ago), none of the games which uses Hackshield (an anti-hacking program) are able to run. It will load for a little and then show up with an error saying that an error has occured,…
-
Disable Firewall (no Vga, Remote Desktop)
Hi, I'm install BitDefender on a device that doesn't have a VGA card connected to its motherboard. I was using Microsoft Remote Desktop Connection to install it. Now, I'm unable to connect to it. Apparently, BitDefender is blocking the port, which I believe is kind of stupid since I was using it while installing the…
-
"port Scan Detected" Pops Up Every 10 Minutes
I get the following alert extremely frequently everyday: "A port scan agaisnt your computer was detected and blocked." It seems that my laptop (which is in my home network in windows 7 64bit) port scans my desktop (the PC on which the issue is present, which also runs the same OS) all the time. I'm also getting it from an…
-
Stop Port Scan Popups But Continue To Stop Port Scans
The port scan pop up is annoying. Have tried to disable. Not working. Please help. Windows 7 64Bit SP1 Total Security 2012 No Other Security Fresh Install Intel Core i5 760 16 GB Ram
-
Is It Okay To Allow Inbound Connections For Browsers?
I am using Bitdefender Internet Security 2012. In application rules for firefox, IE incoming traffic is allowed by default. The firewall has general settings to block incoming ICMP. Do I need to block incoming connections for browsers? I have attached screenshot of firewall settings for firefox.
-
Can't Change A Aplication Rule Seted By Mistake!
Ok I was with the firewall on paranoic and I accidently seted a program on block & I cheked the remember box. Know evrey time I start that program appears on denny in firewall even if I manualy change it on allow? How can I fix this?
-
[escalated]Firewall Adapter Zones
Hi The lan I connect to is not very trustworthy as multiple people use it. So I would like to deny a number of local ip addresses or preferably mac addresses. I was experimenting with the firewall adapter zone options. I thought i would test the deny functionality by setting the ip address of my computer and network router…
-
Paranoid Mode
How come in the final version, in the firewall settings tab advanced, paranoid mode dont appear anymore? in the previos version it was everything fine. And i have no alert whatsoever by the firewall, autopilot disabled.
-
Windows Live Mail Needs Firewall Turned Off?
Hi, I installed 2012 Total Security. Now Windows Live Client does not work unless I turn off the firewall? I cannot configure firewall as well. I have allowed these EXE's: wlmail.exe wlcomm.exe Yet Mail does not work. Please help. Sunil Gupta
-
Bitdefender 2012 Slowdown Internet Connection
Hi there, i feel that BitDefender 2012 users have same problem like mine. When i browsing internet either using Internet Explorer (IE8 & IE9) and also Mozilla Firefox (Build 6.0.2), it's feel so slow when loading a web page and some time it's feels years to the web browser show the page even using search engine like Google…
-
[duplicate]Bitdefender 2012 Slow Intenet Download
I think who use BitDefender 2012 have this problem, got slow download progress either using web browser or download manager (i use IDM). Using IDM it's only show one connection also wait to download take a long time but previous version dint have this problem. As i test it's happen on most of website (of course website…
-
Ts 2012 - Firewall Ask Allow Internet For Each App
This is a new thread since my original one was closed prematuraly..! It would be nice to WAIT until the customer says it is solved before marking a thread as solved, don't you think??? Anyway.... I have installed Ts 2012 on one of my PC and I do NOT have "paranoid mode" anywhere"..... where is it??
-
Need Help Regarding "network Details"
I've been using Bitdefender Total Security 2012. Im not able to understand,what should be the right settings for me in "Local Area Connection" (Firewall). I mean the "Network Type", "Stealth Mode", "Generic". Please tell me the proper option for me...
-
Downloading Problem
Hi. I am using Bitdefender Internet Security 2012. I am having a problem in downloading any file. IDM is not working at all. Normal download window is either taking a long time or not downloading at all. Any feature in BIS 2012 that can be turned off to resolve this issue ? Thanks. Waiting for reply.