-
Site Advisor
Hello, As I recall BitDefender used to put a safe or not safe tag beside sites when I searched. This has disappeared now.Is this no longer available. Running Total Security 2017. Any help would be appreciated. Hitbit
-
Firewall Settings and permissions
I have the 30 days trial BF 2017 running ... I like it, BUT for the firewall .... So 3 questions regarding the firewall: 1) Is there a quick way of just blocking all in and out traffic .... a thing i very much appreciate in free firewalls 2) Saving a modded rules.xml on location (Bitdefender 2017 firewall folder) seems…
-
isatap.gateway
hi there, Does anyone know what this is below under Modules > Firewall >Adapters ? I don't believe I've noticed it before and it could be new?
-
BD Icon Grayed Out
On my PC I find the BD icon in the notification tray grayed out. I look at Services and will find the BD Virus Shield service stopped. I restart the service and all is ok. This has happened at least a half dozen times. Any idea why this is happening?
-
Clearing lists of blocked site in the Web Protection Module
Can anyone tell me how to clear the notification list of blocked sites in the Web Protection module? (I understand why they are there and are to be avoided,) I just want to Know how to clear down the list. I initially thought once I cleared them from the notification tab that it would also remove them in the Web protection…
-
Bitdefender crashing at every turn
Getting this error every 5 - 15 minutes. My other computers with the product installed are doing the same thing.
-
NAS Plex Media Server / Firewall Rules
Hi there, I've been experiencing an issue after updates have been applied to BitDefender Total Security 2017 that seem to block my local network connection running Plex on my NAS WD My Cloud EX2 Ultra. Plex has a plug in that runs on the EX2. It would randomly when trying to connect via Google to the Plex library come up…
-
[Fixed] Bitdefender Total Security 2017 Firewall Adapters Missing
I have been running Bitdefender Total Security (BTS) since the 2008 version. Within the past 3 months, we upgraded to the 2017 version. This past week, I have had multiple PC's running BTS 2017 exhibit the same problem. All PC's in question are running 64-bit Windows 7 Professional Service Pack 1. The problem surfaces to…
-
Thunderbird AntiSpam
This isn't as question as much as an opinion. I am using Total Sec 2017 and while I like it, I am quite dismayed over their worthless email antispam module. Perhaps IF I knew it was so lame, i'd have gone with another product. It doesn't work, and i had no idea why until I found a post in here that it ONLY works in POP3.…
-
firewall settings
Can someone tell me if this is what the firewall settings should be?I have no idea what generic is.I dont mess with the firewall so just wanted to ask.
-
DoubleAgent
Whats bitdefender going to do about this and how quick do they think they can release a patch ? https://cybellum.com/doubleagent-taking-full-control-antivirus/
-
BD2017 FW blocks IPv6 traffic unless network set to trusted
I just upgraded BD2016 to BD2017 for my computers at home. I have 8 computers on my family account. The BD2017 firewall blocks IPv6 traffic on my windows 10 machines, even when ICMPv6 and ICMP are enabled in the firewall. The only somewhat reliable way to get IPv6 working on my Windows 10 machines with BD2017 is to set the…
-
Unable to switch firewall on
After having trouble with the missing network adapter and printer connection, I uninstalled, repaired and rebooted numerous times. Whilst I can now print from the printer, I cannot switch the firewall on and the Central messageboard tells me that my device is at risk. I go to Modules> Firewall and the toggle is switched…
-
Security report - vulnerabilities
My latest security report says that there were 79 vulnerabilities fixed. Like what? It doesn't say what they were. Is there a hidden list somewhere?
-
Search Advisor doesn't work on Chrome
Hello, I'm using BDTS 2017, Windows 10 pro and Search Advisor doesn't work on Chrome, but it works fine on Edge and IE. What can I do ?
-
What Happened to "BitDefender Awake"?
For a while, BD was very slow to do anything on my system after booting up. Then, after a while BitDefender Awake! popped up. How daft, I thought. Then it went away and I've not seen it since. So, what was this, what was it doing and where has it gone? Is BitDefender always sleeping now? Cheers!
-
TS17 - Problems with Domain/location awareness
I have a home network running a Windows Domain that I use for testing/study purposes. This run server 2012 R2 and my Win 10 x64 laptop connects to it. For the most part everything works fine. Laptop logs on, gets an IP address/DNS, can access shares on the servers and get out to the Internet without any issue. However,…
-
bitdefender has detected that you are connected to an unsafe wi-fi
Hi Every so often when i log onto my laptop, Bitdefender shows a pop in the bottom left hand corner of my screen saying "bitdefender has detected that you are connected to an unsafe wi-fi" but when i check in the WI-FI advisor module it says my wi-fi connection is secure (green bar). I only have one Home network and no…
-
BTS17: how to finetune firewall-->log missing
Hi, I'm experiencing troubles with a newly installed Brother scanner. The network communication is blocked by the bitdefender firewall (everything works fine after turning off). As I do not know which ports and protocols are used for that scanner I just would like to check the firewall log and open up the blocked traffic.…
-
False Positive Reported
Since the last version update a few days ago, I am getting repeated "Phishing" warnings for the URL listed below. https://b.company-target.com/etc.html VirusTotal reports that even Bitdefender is reporting that URL as clean. I have filled out a False Positive report and submitted it. Submitted for action and for the…
-
BitDefender Total Security Repair Wiped All Setting and Disabled Firewall
I repaired my BDTS according to this; https://www.bitdefender.com/support/how-to-repair-bitdefender-2017-1737.html On rebooting, it spent a while updating and then I rebooted. Everything has been wiped from the setup and Firewall will not stay on. There's nothing left, and when I enable Firewall and close the window and…
-
[Fixed] Problem with network exceptions
Hello. I am using Viscosity vpn client & BTS 2017 & windows 7 ultimate x64, all soft is updated. So after last update of BTS (about 2 days ago), i have an issue with network exceptions. My current network exceptions were not working. So i deleted all exceptions and then added them again. So everything started working well.…
-
Network Access Blocked
Hi, Since upgrading my Windows 10 to the lastest Insider preview (build 15055) I can no longer access local network resources, if I turn off the firewall all is good. IUn the interim unitl this is fixed I will be re-enabling Windows 10 firewall. Regards. Peter
-
Bitdefender says it found infected email attachments but I cannot see anything to advise me where th
It found password protected files and showed where they were so I was able to fix that but I cannot see anything relating to the email attachments? I am only using gmail
-
Antispam toolbar not working in Thunderbird
Hi, I've installed the trial version of Internet Security 2017 in order to test it out before buying. However, it seems that the anti spam functionality isn't working properly. It seems that the spam is correctly detected and tagged, but it's still delivered into my mailbox. The antispam toolbar in thunderbird appears to…
-
My company's VPN needs Bitdefender turned off
I have Bitdefender Total Security Multi-device 2017 running on Windows 10 Home. My company's VPN doesn't want Bitdefender running, it wants Windows Defender running. Is there an easy way to turn off Bitdefender 2017 temporarily? How can I do this? I don't want to uninstall Bitdefender.
-
How to find infected email attachments
I am using the 30 day trial of Bitdefender Internet Security. When I do a full system scan, the result says I have some infected attachments in some of my email and I should delete them. I do not see them in the log - how can I find them? Thank you.
-
BitDefender Menu Firewall ON but...
When I go into my BitDefender Total Security 2017 menu it shows all is well. SEE ATTACHMENT_A.JPG Both Firewall are off? SEE ATTACHMENT_B.JPG I tried to turn on BitDefender - nothing. I tried to turn on Windows - nothing. SEE ATTACHMENT_C.JPG I "repaired" - rebooted and firewall was working. BitDefender updated and…
-
Unsafe Wi Fi Connection
Hello, I signed up for a free trial of Bitdefender Internet Security 2017 and did a vulnerability scan and the result said my Wi Fi connection is unsafe - the password is weak. So, should I change the password, and if so, how would I do that? Bitdefender recommended connecting to a more secure network ( which I do not know…
-
Is it possible to save Ransomware Trusted Applications
For some reason I had to do a re-install of Bitdefender Anti Virus Plus. After re-install I had to configure the complete Ransomware trusted applications. Is there a way to save these settings? Config file or reg-key. It should be part of the application, I think, but I cannot find it.